![]() |
|
#25
|
||||
|
||||
|
Quote:
Today's sets with the jungle IC can develop more than just OSD display problems if that chip goes bad, as most of the set's control circuits are on the chip; it all depends on what part of the IC goes. My RCA CTC185 XL-100, for example, developed a problem with its jungle IC after I'd had the set about a year; the technician who repaired the set (for an unrelated problem) told me it would cost at least $100 to replace and reprogram the chip. The warranty had expired by this time, so I decided against the latter and am now using the TV as it is. The set works very well, is in daily use with OTA signals, a VCR and a DVD player, and makes a beautiful picture, so I really don't know to this day (eight years later) what the tech meant when he said part of the jungle IC was defective. Perhaps I'd notice the problem if I were using the set on an antenna, but since I have cable it doesn't show--probably because the cable signal is much stronger than any antenna signal would be in my area. BTW, I agree with the person who said in a previous post that universal TV remotes often do not control every conceivable function of today's sets, making it almost imperative that the original remote be used if the more exotic functions are desired. Again using my RCA CTC185 as an example, the commercial-skip function only works with the set's original remote; every universal remote I've used with this set (including a GE universal I bought for $5 at Big Lots a couple years ago, and still use today, so I could use one remote for my TV, VCR and DVD) has operated all functions except the commercial skip. IMHO, it depends on personal preferences. If all one wants is control of basic functions of a TV and/or VCR/DVD, most universals will work just fine. However, for full control of every function available on any of these devices, in most cases the original remote(s) must be used. If the original(s) is/are lost, damaged or quit(s) for any reason, and a universal remote doesn't operate some special functions of your devices, you're out of luck as far as those functions are concerned. Since, as has been noted, many original TV remotes are difficult to find, are NLA (no longer available), or have been lost or broken, as is often the case with some TVs offered for auction on eBay, universal remotes are being used in place of the originals, but the tradeoff is, again, loss of some functions offered by the remote that came with the set. However, many people are just happy to have a remote again (after the original breaks or quits for whatever reason) and could not care less about the lesser-used functions such as commercial skip and the like, so they won't mind that these extra functions may not work with a universal controller. I know at least one person who doesn't use her TV remote for anything but turning the set on/off, adjusting volume and changing channels; she just ignores the rest of the buttons, including mute. A universal remote would suit this person just fine, and would accomodate her VCR and DVD as well.
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. |
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|