![]() |
|
|
|
#1
|
||||
|
||||
|
Those sets also sported the Philco and Sylvania badges. In fact, the control placement and knobs are very similar to my '81 (pre-NAP) GTE-Philco. I remember reading somewhere where NAP bought Sylvania for their CRT division. Those C3 chassis were fairly reliable. I've seen the usual power supply problems, vertical problems, and that yellow retrace cap by the HOT crack and burn a few times.
Correct me if I'm wrong; but, I think this may have been the last NAP chassis to use a rotary tuner. Every NAP set that I've seen after about '84-'85 had a digital tuner. |
|
#2
|
||||
|
||||
|
I think I had this exact set at one point. Could have been an '83 though.
Anyway, it is interesting to hear about Philips and their relations with Sylvania CRT's....Wonder which factory these tubes were made at? Batavia, NY? |
|
#3
|
||||
|
||||
|
The 19" Magnavox I had for years was a digital tuned set - not cable ready. It was made in late 1985 - I received it for Christmas that year. If there was still a knob-tuned set available I really don't think my parents would have spent the extra money for a digital one.
|
|
#4
|
||||
|
||||
|
Quote:
I've seen one 19" knob tuned Zenith set from around '87 and an RCA XL-100 from the very late '80's that still used a knob tuner (CTC136, IIRC). There were a few RCA/GE consoles (CTC130) from around '86 or '87 that had the single knob varactor tuner as well as some Panasonic/Quasar consoles from the same period with knob tuners. Emerson, KTV, Samsung, Goldstar, Megatron, and other "off brands" had knob tuned sets up until '93, when the Gov't required closed caption decoders to be built into all sets. I used to sell many knob tuned TVs to older people that were intimidated by TVs with pushbuttons. |
|
#5
|
||||
|
||||
|
Some more info: This set uses a switched mode PSU. Apparently the CRT was used in several arcade monitors back in this time. I ran a search and the tube number came up multiple times. Must be a decent crt.
|
| Audiokarma |
|
#6
|
||||
|
||||
|
I meant Magnavox/NAP sets in particular. I saw a 19" color Zenith with knobs that was from '87-'89 at a thrift in February - made in Mexico I think.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|