40" Sony Free on CL

[IsthmusTV]

I thought this looked interesting:

http://madison.craigslist.org/zip/2464330672.html
(no affiliation)

Is that wooden frame original? I have no space for this myself.

-Clark

[andy]

...

[kx250rider]

That's a 32" standard Trinitron from the early 90s. Good set, but sadly worthless.

Charles

[IsthmusTV]

40" seemed hard to believe for a CRT. Glad to know that I'm not passing up something special

[jr_tech]

They show up on eBay once in a while...usually not free:
http://cgi.ebay.com/Sony-Trinitron-W...item35b33abecb
not affiliated,
jr

[Electronic M]

There were 40" NTSC sets made (I've seen at least two from other brands).

Tom C.

[kc8adu]

i owned a mitsubishi 40" set .was dropped in shipment and busted up.crt was fine.rebuilt it with fiberglass cloth,resin,and bondo.found some auto paint that was close.unless you looked inside you could not tell.a neighbor wanted it so bad he could taste it.one day he made an offer i could not refuse.fun to move.iirc it weighed 300+ pounds.

[kx250rider]

I have a few 40" CRT sets; a Mitsubishi CS-40503 (on long-term loan to a friend), and two Sony KV-40XBR800s (one is for parts, since we use one in the house). The largest tube ever made was the Sony 43" 4:3 CRT in 1989 (in the PVM-4300U).

Charles

[VintagePC]

Originally Posted by kc8adu

iirc it weighed 300+ pounds.

Those things are _HEAVY_. I've got a 21" CRT (professional PC monitor, mind you) that I can't even lift by myself. Not so much for the weight as the fact that its shape means you can't lift the thing without either a) having all sorts of edges digging in to your arms and torso, or b) having the center of gravity be just so that it's at risk of tipping out of your hands.

OTOH, if you consider the sheer amount of force involved with a tube that size, there better damn well be a lot of thick glass to keep it contained.

I couldn't begin to imagine the noise one of those tubes would make if it imploded... and you probably wouldn't want to be near it at all.

[ChrisW6ATV]

Originally Posted by VintagePC

I couldn't begin to imagine the noise one of those tubes would make if it imploded... and you probably wouldn't want to be near it at all.

But, I bet it would be fun to wear a Kevlar suit and drop one onto a concrete surface, say, five feet below you, while recording the whole thing with a high-shutter-speed HD camcorder. A dead CRT, of course.

[kx250rider]

Originally Posted by VintagePC

I couldn't begin to imagine the noise one of those tubes would make if it imploded... and you probably wouldn't want to be near it at all.

.....As the teenage boy in me emerges . I have an idea for when I get back to California!

Charles

[JCFitz]

Originally Posted by VintagePC

I couldn't begin to imagine the noise one of those tubes would make if it imploded... and you probably wouldn't want to be near it at all.

A Sony 32" was bad enough. I had a 32" set with a warped shadow mask and threw a piece of concrete at the bell from about 6 ft or so away sheilding myself with a big piece of plywood. The boom sounded like a shotgun blast and glass went everywhere.

[etype2]

Originally Posted by kx250rider

I have a few 40" CRT sets; a Mitsubishi CS-40503 (on long-term loan to a friend), and two Sony KV-40XBR800s (one is for parts, since we use one in the house). The largest tube ever made was the Sony 43" 4:3 CRT in 1989 (in the PVM-4300U).

Charles

Anyone have a photo of the Sony 43 inch PVM-4300U CRT set?

[ChrisW6ATV]

Here is a rough picture from the manual cover:

http://real-manuals.com/cover-manual/SONY/PVM4300.jpg

[etype2]

Originally Posted by ChrisW6ATV

Here is a rough picture from the manual cover:

http://real-manuals.com/cover-manual/SONY/PVM4300.jpg

Thanks. Read that the Sony 43 inch CRT set was sold only in the Japanese market. Any truth to that?

Excuse me for the brain f_ _ t. Just noticed the manual is written in two languages.