Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 06-25-2009, 08:14 AM
dr.ido's Avatar
dr.ido dr.ido is offline
VideoKarma Member
 
Join Date: Mar 2005
Location: SE Melbourne, Australia
Posts: 550
Siemens Bildmeister FC 399



It's road side rubbish collection time again here, and that means more TVs. So far this is the only one worth mentioning.

A Siemens Bildmeister FC 399 26" delta gun. Picked it up just in time before the heavy rain hit. The control panel has been pushed into the cabinet, but otherwise it's in reasonable condition at least physically. Briefly powered it up this morning and it's horizontal output stage squealed at me in protest (it doesn't like being awoken at 5:00am anymore than I do).

The horizontal output transistor is intact, so my first guess would be the tripler, though I've yet to investigate further. The green tripler appears to be a replacement type that I've often found bad in various other sets.



Plenty of dust and crud. A couple of boards are looking a bit crispy. The CRT is an RCA A67-150X. The back cover has a little flap to access the convergence controls without removing it.
Reply With Quote
  #2  
Old 06-25-2009, 10:17 AM
firenzeprima's Avatar
firenzeprima firenzeprima is offline
que trabaja pierde tiempo
 
Join Date: Aug 2008
Location: FLORENCE ITALY
Posts: 297
wow! i think that is 27" bacause the CRT is A67

Last edited by firenzeprima; 06-25-2009 at 10:21 AM.
Reply With Quote
  #3  
Old 06-25-2009, 06:36 PM
AndrewM AndrewM is offline
VideoKarma Member
 
Join Date: Feb 2008
Location: Victoria, Australia
Posts: 121
Another nice find!
It is the same as one I have acquired recently.
I'm constantly being surprised at the unusual sets that occasionally turn up still.
Reply With Quote
  #4  
Old 07-01-2009, 03:16 PM
tritwi's Avatar
tritwi tritwi is offline
zenith mad
 
Join Date: Sep 2005
Location: Florence (Italy)
Posts: 125
beautiful set

Beautiful set, really! Does it have provisions for an ultrasonic remote control?
Reply With Quote
  #5  
Old 07-03-2009, 09:54 AM
dr.ido's Avatar
dr.ido dr.ido is offline
VideoKarma Member
 
Join Date: Mar 2005
Location: SE Melbourne, Australia
Posts: 550
I don't think this one has the remote control, or at least the sensor isn't obvious. I haven't had a chance to have a good look at it since I took the photos (unfortunately my back is currently paying the price for moving all these sets around by myself).
Reply With Quote
Audiokarma
  #6  
Old 07-05-2009, 02:16 PM
Telecolor 3007's Avatar
Telecolor 3007 Telecolor 3007 is offline
I love old stuff
 
Join Date: Jul 2004
Location: Bucharest, Romania
Posts: 2,123
:
__________________
OLD, but ORIGINAL, not Made in CHINA.
Sailor Moon
Reply With Quote
  #7  
Old 07-09-2009, 08:12 AM
daro's Avatar
daro daro is offline
VideoKarma Member
 
Join Date: Oct 2005
Location: Tanawha, Australia
Posts: 140
That Siemen uses the Blaupunkt KC chassis & that set you have got has no remote, The remote version of the KC chassis used to have buttons on the front to control the various main functions such as volume, colour & brightness.

The chassis has got an thyistor horz o/p stage. you will find that there are 2 thyistors used, 1 to do the trace & the other to do the retrace.

This set was typical of all Europien designs in the mid 70's sold in Australia & the set also has a phase controled power supply which means if the hook the thing up to an isolating transformer, the transformer will get very hot after a short time due to the DC going back up the mains & causing the transformer to saturate.

I used to play with these sets around 20 years ago so I have learned a little bit about this beastie.

Last edited by daro; 07-09-2009 at 08:23 AM.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:05 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.