![]() |
|
#1
|
||||
|
||||
|
Value of this micamold?
I'm horrible with these. Can anyone give me the value of this cap?
Thanks!!!
__________________
"Restoring a tube TV is like going to war. A color one is like a land war in Asia." |
|
#2
|
||||
|
||||
|
This cap goes between pins 4 and 5 of the 6J5 in an RCA 8TS30. I have this cap at .0047 now from the RCA factory manual. This is one of the "larger" Aerovox caps. I'm having vertical drifting issues with this set, and thought I'd replace it. Do I need a mica here or is it a standard cap?
__________________
"Restoring a tube TV is like going to war. A color one is like a land war in Asia." |
|
#3
|
|||
|
|||
|
Quote:
|
|
#4
|
||||
|
||||
|
Quote:
White= Mica Yellow = 4 Violet = 7 Red = x100 Green = +/- 5% Chuck
__________________
www.myvintagetv.com Learn from the mistakes of others - You can't live long enough to make them all yourself. |
|
#5
|
||||
|
||||
|
That's the problem, this is an Aerovox with no distinguishable arrow. But as I mentioned, I ended up identifying it in the RCA manual as a .0047. Now I just need to know if a standard cap will work.
__________________
"Restoring a tube TV is like going to war. A color one is like a land war in Asia." |
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
Chuck
__________________
www.myvintagetv.com Learn from the mistakes of others - You can't live long enough to make them all yourself. |
|
#7
|
||||
|
||||
|
Sams IDs your cap as 4700pf @ 500VDC, which would make it a silver mica. However, as Chuck said, a poly will work well enough to allow you to diagnose your problem.
__________________
John Folsom |
|
#8
|
||||
|
||||
|
Having a vertical linearity issue, replaced some out of tolerance resistors on the last go-round. Stuffed in the .0047, and it seems about 50% better. Not 100%, but much better than it was
__________________
"Restoring a tube TV is like going to war. A color one is like a land war in Asia." |
![]() |
|
|