Scored a Philco 48-1001 off CL

[Eric H]

Very nice Lee, makes me want to get one going, Philcs's are usually pretty good performers but their chassis are very crowded.

I tested the CRT, stone dead at first but a little bit at 8 volts and it literally jumped up to good, went back down at 6.3 but after a few cycles between 6.3 and 8.0 and it suddenly took off, now it checks solidly in the good zone at 6.3!

Probably not the very best tube in the world but it should work fine after it gets a little use.