GE 810 restoration

[bandersen]

The inside of the cabinet is in good shape.


I was pleasantly surprised that it comes apart quite easily. Just a bunch of phillips wood screws and 1/4" nuts.


The grille cloth peeled right off too. The old adhesive had really dried up.
Does anyone know if there's an good cloth match available ? If not, I'll just clean this old cloth up and glue it back on.
I'll try to find a good match for the light green paint around the screen.




The only problem I've found so far is bubbles in the safety glass Perhaps I can get a new piece cut somewhere - or maybe use lexan or plexiglass