|
Let's see, CTC86. Is that the flat chassis with all the modules laying down? There is an MDR-something regulator module that plugs in on the right hand side of the chassis near the flyback. This could be your problem. RCA says not to repair this module. It should only be replaced. I've seen these fail and the set would fire up, shut down, and tick; but, it could also cause it to be totally dead.
You might also try the horizontal oscillator / driver module. If that module fails, it will kill the set.
I'll see if I can find a Photofact on this.
|
06-30-2008, 12:45 AM
Threaded Mode