Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 12-03-2022, 09:59 AM
Notimetolooz's Avatar
Notimetolooz Notimetolooz is offline
VideoKarma Member
 
Join Date: Mar 2014
Location: Dallas, TX
Posts: 548
Quote:
Originally Posted by Chris K View Post
Yes I remember seeing someone do the re-soldering of the leads after he extended them with copper wire strands pulled from a lamp cord. Long leads will certainly make threading them through the pins all at once much easier. I saw shango replace the pin cap on a CRT with about a dozen leads in play but he didn't extend them and it was an all through or nothing task. He, of course, did it though!
That may have been Phil Nelson of Phil's Old Radios in one of his TV restorations. I seem to remember reading about a base that had come off and one of the leads breaking right at the glass. It was not a filament line and so by carefully chipping a tiny amount of glass out around the wire and using conductive epoxy he was able to get the tube working again. The heater wires handle too much current for this to work.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:37 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.