Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 09-02-2006, 08:49 AM
jstout66 jstout66 is offline
VideoKarma Member
 
Join Date: Aug 2003
Location: Ne
Posts: 1,484
Sony Problem?

I'm not familiar with solid state stuff at all, especially Sony. But I wanted to run a symptom by you and have you take a guess on what the problem could be. Years ago, I got an early 80's Sony 13" monitor/reciever from a thrift store. Gave it to my parents for a spare in the bedroom. The set has seen little to no use for years. Mom went to turn it on the other day, and says the red power light comes on but no sound or picture. I'm guessing flyback? The only reason I think it might be that is that I had a 19" Sony of similar vintage and it did the same thing. Took it in, and it was the flyback. I don't understand how it could be that tho. With both sets they worked fine, and just didn't come on the next time they were powered up. I'm not going to attempt to fix this one or take it in. Just curious as to what you think? Also, I'm going to pitch it, unless one of you want it for the cost of shipping. It's a cool looking set, which is why I got it. Doesn't look like the run of the mill Trinitrons of that era. I'll get the model number when I go up there tomorrow if anyone is interested. I think it's from 1983. It's not cable ready. Does have primitive OSD (channel, volume bar, and I think it says "muting" when mute is hit) It's got the cool remote that has channels 2-13 on it. I'll post the model number tomorrow. Also, if no-one wants the set, but needs the remote, hit me up as well.
Reply With Quote
  #2  
Old 09-02-2006, 09:24 AM
willyrover's Avatar
willyrover willyrover is offline
AK Member
 
Join Date: Aug 2006
Location: Hamilton
Posts: 43
First thing I always check on TVs with bad behaviour is for "cold solder" joints. Rescued several TVs this way - almost always a bad joint where the flyback is soldered to the board. I guess the flyback is so chunky that if it is unsupported, eventually these solder joints fail.

In fact, the JVC set I have been using for almost 10 years was rescued from the garbage pile at a friends apartment building and had this problem. At the time the TV was only about 2 years old.
__________________

SED Model 2 (homebrew 12AX7 preamp)
Cambridge Audio azur 540p
Rega Planar 2 w/ Sumiko Blue Point Cart
Audio Alchemy DDS Pro Transport
Entech 203.2 DAC
SED Model 1 (homebrew 6V6 PP amp)
Polk Audio Monitor 7
Reply With Quote
  #3  
Old 09-04-2006, 10:07 AM
jstout66 jstout66 is offline
VideoKarma Member
 
Join Date: Aug 2003
Location: Ne
Posts: 1,484
The set is a KV-1358R (made in March 84) and the remote is a RM-712 The set is getting pitched tomorrow, so if anyone wants the tv hollar. I will keep the remote around if anyone could use it. Both free, except for cost of shipping.
Reply With Quote
  #4  
Old 09-04-2006, 02:39 PM
Tom_Ryan's Avatar
Tom_Ryan Tom_Ryan is offline
VideoKarma Member
 
Join Date: Dec 2005
Location: San Diego
Posts: 189
Sure, I could use it. Let me know the ship cost to 92126. Tom
Reply With Quote
  #5  
Old 09-04-2006, 06:29 PM
jstout66 jstout66 is offline
VideoKarma Member
 
Join Date: Aug 2003
Location: Ne
Posts: 1,484
It's yours Tom. PM or email me your address and I'll get it dropped in the mail.
Reply With Quote
Audiokarma
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:07 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.