Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 01-26-2006, 10:47 PM
vintagecollect's Avatar
vintagecollect vintagecollect is offline
VideoKarma Member
 
Join Date: Jul 2005
Posts: 658
Intersting Modular Toshiba

I purchased a Toshiba that happens to modular design as older zeniths, and xl100s. Definetly competing with USA sets of that time. Does anyone know of these??

Overall built very well, look at that flyback, similiar in construction to 50s American flybacks. High quality parts used overall, tuner has metal gears. Pic tube says--BLACKSTRIPE-- a form of black matrix tube?? Toshiba made TVs with this label at least until the 80s. I believe this was their TV model introducing this type of CRT or close. Any AKers with this set?? Date code of 1976. Here's a picture of chassis with IF module removed, Note the hefty HV tripler mounted above Fly.

Attached Images
File Type: jpg babytoshiba.jpg (31.9 KB, 43 views)
Reply With Quote
  #2  
Old 01-27-2006, 12:01 AM
kc8adu's Avatar
kc8adu kc8adu is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: dayton ohio
Posts: 654
those were common in the mid 70's
its an inline slotmask black matrix tube.
the feedthru pins get bad solder joints on those.
resolder them ALL.
btw what brand is the led watch?
i have a bunch of them myself.
__________________
i collect and restore vintage radio's,tv's,and ham gear.
email for more info
Reply With Quote
  #3  
Old 01-27-2006, 04:23 PM
vintagecollect's Avatar
vintagecollect vintagecollect is offline
VideoKarma Member
 
Join Date: Jul 2005
Posts: 658
Thanks for info!! I bought the TV working, has LOST picture & sound, just gets static in speaker with blank white raster, even with strong cable signal hooked up. TV cabinet isn't damaged but TV didn't take kindly to journey through the mail. All module contacts were gently shined, then buffed with soft towel until produced mirror shine, with modules reinserted, still didn't help. Any Suggestions??



The watch IS a repro, still a throw away though, no future service offered on watch if ever needed, do you know of repair center for new LED watches???.

Last edited by vintagecollect; 01-27-2006 at 04:29 PM.
Reply With Quote
  #4  
Old 01-28-2006, 09:14 AM
kc8adu's Avatar
kc8adu kc8adu is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: dayton ohio
Posts: 654
look at the board and note pins soldered on both sides.look at the modules too.
resolder every single one of them from both sides.
as for led watch repair i do that too.
had to open my syncronar to replace its nicads.got lucky that they hadnt leaked yet.
coated the new ones in plasti dip as extra insurance.as rare as these are you dont take chances.
__________________
i collect and restore vintage radio's,tv's,and ham gear.
email for more info
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:50 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.