Picked up an RCA CTC17 console

[radiotvnut]

A friend, who works out of town, found a flea market and he wanted me to see it. So, we took the 60 mile trip and when I walked in the door, I was greeted with the usual BPC/SPC crap. Then, I spotted what looked to be an old console surrounded with junk from all sides. I managed to get enough stuff moved to determine that it was a tube RCA color console.

I asked the guy for a price and he said $20. I gave him the usual speech about it being an old set that might end up being a dud and that I was not willing to gamble $20. I offered $10 and he took it.

I also found one of the unofficial GE 10" "porta color III's", from '83, that uses the "AB" solid state chassis. He wanted $15 for that one; but, I got him down to $10. Turns out that it's dead as a doornail.

He had another set that I should have gotten and may still get it if I have the chance to go back. It was a late '70's silver cased 15" RCA B&W. When Radio Shack introduced the TRS-80 computer, the monitor was actually a tuner-less version of this RCA B&W TV. My friend currently works in the area and I may get him to pick it up for me.

Back to the RCA, the rain chances were pretty high; so, the shop owner loaned me some sort of cover than goes on a waterbed and he asked that it be returned. Lucky for me, I had the cover because we came through a few heavy showers on the way home.

After getting the set home, I discovered that someone had replaced the original CRT with an RCA Colorama in '69. This tube has a cataract around the edges and tested very weak. It came up after I rejuvenated it; but, the reaction I got from the tester led me to believe that it may not last long. When I opened the flyback cage, I felt on the backside of the tire and discovered a deep burn hole about as wide as my finger that extends from the HV rectifier tube socket down to the core. So, I suspect a new flyback is in order.

This is the first tube color console TV that I recall finding in a second-hand store in I don't know whenever.

After leaving there, we hit a couple of places that had "pie in the sky" ideas as to what stuff is worth. One shop was run by a Mexican who had a beat up Philco hippo radio that he wanted $60 for. He had an early Magnavox handwired transistor multiband radio; but, it was missing the back and he wouldn't come off of the $30 price tag. I asked him what he was getting for 45 rpm records and he said $3/each. I told him that was way too much and he replied that he had no trouble getting those prices. Somehow, I think he was lying. My dealings with the Mexicans and Indians around here tells me that they are the type to want something for nothing; but, want a big price for their junk. The guy at this shop acted like he didn't care if he sold anything or not.

The next shop had a pile of Magnavox/Funai DTV converters without remotes. I figured I could get them cheap; but, they wanted $30 each! No thanks! Considering that they had no remotes and no way to test them, $5 would have been a generous price. This shop also had a 13" clear cased RCA prison TV; but, judging by what they wanted for the converters, I was afraid to ask the price of the TV. I really wish these people would get a freakin' clue that this stuff is not valuable and they could sell more of it if they'd lower their prices.

http://www.youtube.com/watch?v=aCAzn-QPTwk

[Rod Beauvex]

I love that Cabinet.

How old is the set itself? Is it 23" or 25".

[radiotvnut]

Circa '66 and it's a 23" viewable picture.

[Robb]

Very nice pickup ! Im more into small portable color tv's, but this is awesome too !
This ooozes quality !

[technicolor]

Originally Posted by radiotvnut

A friend, who works out of town, found a flea market and he wanted me to see it. So, we took the 60 mile trip and when I walked in the door, I was greeted with the usual BPC/SPC crap. Then, I spotted what looked to be an old console surrounded with junk from all sides. I managed to get enough stuff moved to determine that it was a tube RCA color console.

I asked the guy for a price and he said $20. I gave him the usual speech about it being an old set that might end up being a dud and that I was not willing to gamble $20. I offered $10 and he took it.

I also found one of the unofficial GE 10" "porta color III's", from '83, that uses the "AB" solid state chassis. He wanted $15 for that one; but, I got him down to $10. Turns out that it's dead as a doornail.

He had another set that I should have gotten and may still get it if I have the chance to go back. It was a late '70's silver cased 15" RCA B&W. When Radio Shack introduced the TRS-80 computer, the monitor was actually a tuner-less version of this RCA B&W TV. My friend currently works in the area and I may get him to pick it up for me.

Back to the RCA, the rain chances were pretty high; so, the shop owner loaned me some sort of cover than goes on a waterbed and he asked that it be returned. Lucky for me, I had the cover because we came through a few heavy showers on the way home.

After getting the set home, I discovered that someone had replaced the original CRT with an RCA Colorama in '69. This tube has a cataract around the edges and tested very weak. It came up after I rejuvenated it; but, the reaction I got from the tester led me to believe that it may not last long. When I opened the flyback cage, I felt on the backside of the tire and discovered a deep burn hole about as wide as my finger that extends from the HV rectifier tube socket down to the core. So, I suspect a new flyback is in order.

This is the first tube color console TV that I recall finding in a second-hand store in I don't know whenever.

After leaving there, we hit a couple of places that had "pie in the sky" ideas as to what stuff is worth. One shop was run by a Mexican who had a beat up Philco hippo radio that he wanted $60 for. He had an early Magnavox handwired transistor multiband radio; but, it was missing the back and he wouldn't come off of the $30 price tag. I asked him what he was getting for 45 rpm records and he said $3/each. I told him that was way too much and he replied that he had no trouble getting those prices. Somehow, I think he was lying. My dealings with the Mexicans and Indians around here tells me that they are the type to want something for nothing; but, want a big price for their junk. The guy at this shop acted like he didn't care if he sold anything or not.

The next shop had a pile of Magnavox/Funai DTV converters without remotes. I figured I could get them cheap; but, they wanted $30 each! No thanks! Considering that they had no remotes and no way to test them, $5 would have been a generous price. This shop also had a 13" clear cased RCA prison TV; but, judging by what they wanted for the converters, I was afraid to ask the price of the TV. I really wish these people would get a freakin' clue that this stuff is not valuable and they could sell more of it if they'd lower their prices.

http://www.youtube.com/watch?v=aCAzn-QPTwk

Awesome find for $10. I agree with your sentiment that many recent immigrants do not subscribe to the henry ford idea of a normal and healthy profit. It's buy something for $10 and sell it for $200.

However we are not talking about a commodity product here, like cans of soda or cigarettes. Can't go buy a 66 rca over at walmart can we? That leads to wildly different pricing in the second hand market. I've posted ads here to point out idiots trying to get $500, $600,$700 up to $1000 for basically a $20 tv. These people will never lower the price to the $20 it's worth, they will throw the set out before they "let someone get over on them".

However, the market ultimately punishes unreasonable types. Your right, that mexican run store probably has limited sales, and may not be in business long.

[Robb]

Originally Posted by technicolor

Awesome find for $10. I agree with your sentiment that many recent immigrants do not subscribe to the henry ford idea of a normal and healthy profit. It's buy something for $10 and sell it for $200.

You can say the same thing for North American owned companies that manufacture cheap junk overseas for cheap, and mark it up 100x to make massive profits !
They'd rather make massive profit, produce disposable crap and keep North Americans unemployed.
There should be a balance and there should be North American manufacturing excellent products with fair markup profit for owners. This will keep everyone happy.
We dont owe anything to China, Mexico, south asia and Mexico.

[old_coot88]

O wao! This is deja vu stuff. I can remember like it was yesterday, uncrating our very first Rectangular color set for the sales floor. Lots of OOHs and AHs after knowing nothing but Roundies. It was the CTC-17 in a little floor-standing model like the one in the OP.
One interesting feature peculiar to the '17 was a single transistor located somewhere in between the video detector and sync areas.

[DaveWM]

hey old coot, how did the color of the brand new 25AP22's compare to the brand new roundies back when new?

[radiotvnut]

The one thing that concerns me is that it appears that the cabinet bottom is made of particleboard and some shavings have already come off when I was moving the set. The set is currently in my humid basement; but, one of today's project is to get it in my shop because I don't want the dampness to have any negative effects on the cabinet.

[mstaton]

Probably a good idea to put some type of sealer on that particle board so it doesn't get worse.

[radiotvnut]

Any idea as to what kind of sealer I need?

[bgk283]

Looks like they made an improvement from the 16 to the 17 with the location of the convergence socket, nice set ,good luck, if youre in need of the vhf tuning knob I have one for you, PM if interested

[mstaton]

polyurethane would probably work pretty good. I have a NOS fly for that set if yours is bad.

[radiotvnut]

Originally Posted by mstaton

polyurethane would probably work pretty good. I have a NOS fly for that set if yours is bad.

Thank you! There is a very good chance that I'll need that flyback.

[radiotvnut]

Originally Posted by bgk283

Looks like they made an improvement from the 16 to the 17 with the location of the convergence socket, nice set ,good luck, if youre in need of the vhf tuning knob I have one for you, PM if interested

Thank you! I think I have a line on a knob; but, I'll let you know if he doesn't have one.