Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-13-2009, 01:07 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
Got a few sets today

from a fellow Ak member.

1970 Sony KV-1201 working well after a thorough cleaning of the controls and cabinet (smoker's set apparently). CRT is getting dim although the color is solid. Will probably take this one to my TV shop friend and see if they can test the tube.

1985 GE 19" PC chassis with excellent color....very strong CRT and electronic tuner.

Unfortunately I took these pics with my Mac's camera and I cannot adjust exposure. The rasters look better than this in person.

Last edited by zenith2134; 03-25-2009 at 04:18 PM.
Reply With Quote
  #2  
Old 02-13-2009, 02:07 PM
zenithfan1's Avatar
zenithfan1 zenithfan1 is offline
Mark
 
Join Date: Jan 2008
Location: Kenosha, Wisconsin
Posts: 4,211
Nice sets! I really like the Sony, I use the one I have regularly. Not a bad GE either! Ya done good today Tom!
__________________
My TV page and YouTube channel
Kyocera R-661, Yamaha RX-V2200
National Panasonic SA-5800
Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20
Pioneer SX-939, ER-420, SM-B201
Motorola SK77W-2Z tube console
McIntosh MC2205, C26
Reply With Quote
  #3  
Old 02-13-2009, 04:12 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
So far, I haven't even taken the sets apart but further testing reveals that the Sony's degauss section needs service and the GE only needs some basic adjustments like focus and yoke tilt. Feels good to get some new sets.
Reply With Quote
  #4  
Old 02-13-2009, 04:33 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
That was probably the best solid state chassis that GE built. The main things that fail are a 100 uf cap in the vertical circuit, a 100 uf cap by the flyback, and a cap (think it's something like a 4.7uf) in the B+ line to the video output circuit. When this cap fails, the screen will be darker on one side and the picture will be smeary. Some of these would have a burned horizontal centering pot and a shorted HOT, all caused by the 100 uf cap by the flyback.
Reply With Quote
  #5  
Old 02-13-2009, 08:14 PM
Geoff Bourquin Geoff Bourquin is offline
VideoKarma Member
 
Join Date: Nov 2005
Location: Northwest Washington State
Posts: 365
Also on that PC chassis..........

I used to see a 33uf 160 volt cap in the regulated B+ line fail quite a lot in addition to those mentioned by Radiotvnut. The one in the vertical is C-621. I don't remember the locations of the other ones.

There is probably a mini-manual in a little compartment on the back of the set.

I always liked those sets, but, IIRC the CRTs didn't last quite as long as I would have liked.
Reply With Quote
Audiokarma
  #6  
Old 02-13-2009, 08:23 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
This CRT is very strong luckily. And ye its got the minimanual.

Bad news though. I screwed up.......I was reducing the width a bit and the metal shaft of my alignment tool shorted to the horizontal output heatsink. Now I've got a deadset. When i hit the power button, it clicks. And thats all it does.

Guess I'll have to scope out the HOT area.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:09 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.