Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 06-22-2008, 10:09 PM
truetone36's Avatar
truetone36 truetone36 is offline
electronics packrat
 
Join Date: Jan 2006
Location: Trumann, AR.
Posts: 942
Question Rutherford t.v.

Yesterday I brought home 2 console t.v.s, one's a CC2, but the other has me stumped. It's a Rutherford. I haven't found one of these before. It's a late
70's console with the typical cheesy cabinet of the time, and the cabinet shows some water damage on the top and right side. It is a working set,
though so I'll keep it to use in my workroom. On the back of the set it says it was made in Athens, TX. so could there be some connection with Curtes Mathes? Thanks in advance for any and all info.
__________________
Dumont-First with the finest in television.
Reply With Quote
  #2  
Old 06-22-2008, 10:42 PM
sampson159's Avatar
sampson159 sampson159 is offline
sampson159
 
Join Date: Sep 2007
Location: columbus,ohio
Posts: 2,170
i remember those from the big 80s. same as a curtis mathes. here in columbus,most rental places used rutherford exclusively. i believe curtis mathes may had a top of the line cabinet available. the rutherfors were usually pressed wood and vinyl. okay sets. rare to find one here these days.
Reply With Quote
  #3  
Old 06-22-2008, 11:00 PM
Dave A's Avatar
Dave A Dave A is offline
VideoKarma Member
 
Join Date: Aug 2003
Location: SE Pennsylvania
Posts: 1,569
Here is the Wikipedia page on CM.

http://en.wikipedia.org/wiki/Curtis_Mathes

The sets were made in Athens, TX.

Dave A
__________________
“Once you eliminate the impossible...whatever remains, no matter how improbable, must be the truth." Sherlock Holmes.
Reply With Quote
  #4  
Old 06-22-2008, 11:08 PM
truetone36's Avatar
truetone36 truetone36 is offline
electronics packrat
 
Join Date: Jan 2006
Location: Trumann, AR.
Posts: 942
I've been by the old CM plant in Athens many times (my sister lives near there). Were the Rutherfords made by them?
__________________
Dumont-First with the finest in television.
Reply With Quote
  #5  
Old 06-22-2008, 11:28 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I recently junked a circa 1980 model Rutherford TV/stereo combination. It looked just like a CM set from the same time period. The stereo was on top of the TV and the whole top lifted up. The cabinet was a junky particleboard and vinyl job. The chassis was an NEC; just like what's in the CM branded sets. The tuner was a standard VHF/UHF rotary tuner. The CRT was an inline type like what was used in early '80's RCA sets.

It had the name of some rent-to-own place stamped on the back and the people that gave it to me claimed they gave around $1200 for it.

I junked the set because the CRT was toast and the chassis had other problems.

I used to get a lot of these CM sets from the mid '70's through the early '80's and I was not at all impressed with them. Most of them had weak/toasted CRT's and they were cheap built. Someone could have gotten a TOTL Zenith or RCA for what some of those CM sets cost. I think the longer than usual warranty is what sold a lot of people on the CM sets.

OTOH, I was given a mid '60's CM color set (years ago) that was in a quality cabinet and the chassis was an RCA clone.
Reply With Quote
Audiokarma
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:05 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.