Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 01-31-2008, 09:49 PM
John Marinello's Avatar
John Marinello John Marinello is offline
<-- "Byron"
 
Join Date: Dec 2005
Location: Lake Murray, SC
Posts: 1,124
Beltron question...

What's the difference between the 8080-A, and the 2972-E?

They look very similar:

http://cgi.ebay.com/ws/eBayISAPI.dll....cWAT.m240.lVI

http://cgi.ebay.com/ws/eBayISAPI.dll....cWAT.m240.lVI
Reply With Quote
  #2  
Old 03-21-2008, 12:00 PM
bbonds73
Guest
 
Posts: n/a
8080

We have the 8080 and and we don't know the wiring for the universal adapter. We also don't know how to post a new thread on this. Perhaps we can help each other?

Thanks!
Reply With Quote
  #3  
Old 03-21-2008, 09:25 PM
kbmuri's Avatar
kbmuri kbmuri is offline
VideoKarma Member
 
Join Date: May 2006
Location: Fort Wayne, IN
Posts: 590
Mine is the 2972-E. It works magnificently. Let me know if I can help with any details.
Reply With Quote
  #4  
Old 03-22-2008, 12:06 PM
bbonds73
Guest
 
Posts: n/a
I have the model 8080a and the universal adpt leads just have the clips on the ends but they are not marked which is heater,K etc do you know the pin out of the universal adpt??
Reply With Quote
  #5  
Old 03-22-2008, 06:59 PM
Big Dave's Avatar
Big Dave Big Dave is offline
Dead from the neck up
 
Join Date: Jun 2002
Location: Warren, OH
Posts: 474
The Beltron pinout:

Pin 1.: No connection
Pin 2.: Heater
Pin 3.:G1 Blue
Pin 4.: G1 Green (black and white)
Pin 5.: G1 Red
Pin 6.: No connection
Pin 7.: Heater
Pin 8.: Cathode
__________________
The world's worst TV restoration site on the entire intranoot and damn proud of it.
http://evilfurnaceman.tripod.com/tvsite
Reply With Quote
Audiokarma
  #6  
Old 03-23-2008, 11:57 AM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
...

Last edited by andy; 12-07-2021 at 10:59 AM.
Reply With Quote
  #7  
Old 03-23-2008, 12:26 PM
Big Dave's Avatar
Big Dave Big Dave is offline
Dead from the neck up
 
Join Date: Jun 2002
Location: Warren, OH
Posts: 474
The Pinout I Listed Is What Was Shown In My Instruction Book!!!
__________________
The world's worst TV restoration site on the entire intranoot and damn proud of it.
http://evilfurnaceman.tripod.com/tvsite
Reply With Quote
  #8  
Old 03-23-2008, 12:56 PM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
...

Last edited by andy; 12-07-2021 at 10:59 AM.
Reply With Quote
  #9  
Old 03-23-2008, 09:59 PM
John Marinello's Avatar
John Marinello John Marinello is offline
<-- "Byron"
 
Join Date: Dec 2005
Location: Lake Murray, SC
Posts: 1,124
Quote:
Originally Posted by andy View Post
Maybe it's a typo. I can't imagine that it would work with the cathode and G1 pins swapped. Can anyone verify the pinout by looking at an actual adapter socket (using the CRT's pinout as a reference)?
Big Dave and Andy are both right! Some testers made the grids common, but Beltron chose to make the cathodes common, and they all connect to pin 8. The CRTs with a single G1 pin use a different adapter.
Reply With Quote
  #10  
Old 03-24-2008, 12:29 AM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
...

Last edited by andy; 12-07-2021 at 10:59 AM.
Reply With Quote
Audiokarma
  #11  
Old 12-04-2008, 09:24 AM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
Quote:
Originally Posted by andy View Post
Are you sure about that? I think you have the cathode and G1 pins swapped (pin 8 is the common G1, and pins 3,4,and 5 are the cathodes). This is how my home made adapter is wired and it works. Your pinout would make it impossible to use with modern CRTs that have a single G1 pin.

My Beltron has an octal to a 9 pin adapter cable (labeled adapter A). The 9 pin connector is made by AMP. Does anyone know the exact model of connector that will fit it? I want to make my own adapter sockets.
I believe it's AMP (Tyco) 1-640511-0 using pins 640545-1.

John Y.
Reply With Quote
  #12  
Old 12-04-2008, 09:19 PM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
...

Last edited by andy; 12-07-2021 at 10:59 AM.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:23 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.