Beltron CRT tester help - Videokarma.org TV - Video

Dave A · #1 03-14-2007, 07:48 PM

I picked up a nice looking and working Zenith 19" BW for a princely $10. All SS model J192W. Skinniest thing I ever saw.

The CRT is a bit tired and I wanted to give it the Beltron treatment, but I cannot find the instructions nor is my memory that good.

Does anyone have a set to scan and email me or just post the abridged version here. It was a three step thing moving the connector along the taps on the unit. Just a one sheet instruction page.

And if you ever see a Beltron, grab it. The best.

Dave A

radotvguy · #2 03-15-2007, 11:25 AM

i have two beltrons are they are really good . Very user friendly and simple as well .

refill233 · #3 03-16-2007, 05:13 AM

The manual on setup that i have is about 3 pages long front and back.It is a 3 step process that is test,clean,and restore.They are a good unit and we used to give a year warranty (on the tube) after we did a life test.The best you could buy.Sometimes you had to up the filament voltage to get them to clean or restore,depending on how bad the tube was.

Don

hposter · #4 03-16-2007, 06:56 AM

Dave,

Or: test, clean, restore and DISCARD! It's happened lots to me, so I don't bother with the clean & restore, unless the CRT is destined to the trash, any how.

You might get the manual from a listing on AudioKarma, right now...

http://audiokarma.org/forums/showthread.php?t=104769

Harry