Sencore VA48 TV analyzer

[WISCOJIM]

Originally Posted by Flippers

Does anyone have the VA48 manuals available for download? The link above is no longer valid.

I am looking to service an older B&W TV and would like to use my Sencore to do that, but it may require servicing as well as the TV...

Thanks!

John :-#)#

Try this: https://www.dropbox.com/sh/m3kdhzo7v...CywrW-kba?dl=0

.

[Flippers]

Originally Posted by WISCOJIM

Try this: https://www.dropbox.com/sh/m3kdhzo7v...CywrW-kba?dl=0

.

Appreciate the manuals, might you have the schematics too?

Thanks!

John :-#)#

[WISCOJIM]

Originally Posted by Flippers

Appreciate the manuals, might you have the schematics too?

Thanks!

John :-#)#

I only had whatever was at the dropbox link. I don't remember who scanned it or where I got it from.

If you find the schematic, please let me know and I'll add it to the dropbox folder.


Jim

[Marco-nix]

Thanks wiscojim .

[Flippers]

Thanks!
John :-#)#

[Jon1967us]

Sorry to resurrect this thread but I’m having a problem where my VA48’s Chroma burst pattern is not displaying. All other patterns show except that one. Any suspect electrolytics have been replaced throughout the boards.

I don’t have a schematic, so I’m kind of working blind. Do the xtals in these go bad?

[Marco-nix]

Originally Posted by Jon1967us

Sorry to resurrect this thread but I’m having a problem where my VA48’s Chroma burst pattern is not displaying. All other patterns show except that one. Any suspect electrolytics have been replaced throughout the boards.

I don’t have a schematic, so I’m kind of working blind. Do the xtals in these go bad?

Well , you don't need a schematic to know what is written on an electrolytic capacitor. If you already know which part is at fault , if you know how to solder, this shouldn't be a problem for you.

Personally, I only need a diagram if I do not know the problem of a particular brand or if the brand of a device has recurring problems. Otherwise I only change the capacitors of the missing part (if I know it's from there) otherwise, yes you will need a schematic.