|
|
|
#16
10-01-2019, 10:12 PM
|
||||
|
||||
|
Operation restored! I peeled off the old tire and silicone and redoped it in Permatex Ultra Grey. Were makin' a good picture now. There is some arcing in the HV rectifier socket, but I'll clean that later. I also picked up a newish HV rectifier tube socket at Surplus City.
Another weird thing is there was some big arcs between the HV anode lead and the HV rectifier filament on the back of the socket (before I got it cleaned up) and it appeared to short out the colorburst tube, I swapped it and the color came back. 
|
|
#17
10-02-2019, 12:28 AM
|
||||
|
||||
|
Wicked! That's awesome you got it up and running! Was it a smoker's set?
__________________
Honey, turn on the tv.. I'm cold!
|
|
#19
10-02-2019, 03:50 AM
|
||||
|
||||
|
That's good. Maybe in the socket there is some arcing from a couple pins that are by each other. take a gentle brush and some electronics cleaner and scrub the socket. Front and back.
__________________
Honey, turn on the tv.. I'm cold! Last edited by freakaftr8; 10-02-2019 at 10:29 AM. Reason: Spelling
|
|
#20
10-10-2019, 11:32 PM
|
||||
|
||||
|
Had some more arcing again dammit. I stupidly cut the HV rectifier filament wires the I pulled the fly out and re-insulated them with silicone, but not well enough as one of the leads gave me a tingle with the set off lol always discharge the anode/pic tube
|
| Audiokarma |
|
#21
10-11-2019, 01:43 AM
|
||||
|
||||
|
Oh no.. been there, done that. An old Zenith color console I had once gave me a nice bite.
__________________
Honey, turn on the tv.. I'm cold!
|
 |
|
|
Linear Mode
