CTC-7: Convergence, Convergence, Convergence

[jbeary]

Wesley,

Yo man! I see your brother more than I see you, what's up with that? You need to let him move in with ya'll so when we see him, we see you too! Are you sure you want to get into this convergence stuff? You know how I am, I want it perfect! Com'on over anytime and get shocked some... What do you have again? A CTC-9? This is going to be the fun part after you get everything squared away in the circuitry of that set

I've got an oscilloscope and a dot generator for you if you don't already have either! Let me know if you've had the chance to work on that Silvertone...

John: Your set of instructions are dead on and this is pretty much what I'm doing except I'm not turning my blue and green screens down when I do the purity adjustment. I just kill the guns and then check the blue and green separately after the red is set. Thankfully, I haven't had to fiddle with the edge magnets. I need to remember to check the purity again after doing the static convergence because I think it gets thrown off as soon as I adjust any of the static convergence magnets. The wife came down with a bad cold, so I have to wait until I have the chance to take and post some snap shots. But thanks for letting me know that you have a set of guns we can look at. My CRT (or kinescope) is a 21cyp22... Pretty sure that's the number, but I don't have that info in front of me.

THANKS AGAIN!
Jeff