|
I use one of these. I wish I had the service manual. It'll be no big problem to get going. If you loosen the screws on the thing the cords are wrapped around, and slide it off, the adjustments are under there. If it doesnt work, wont lock or something, you can hook it up to a known good set and twist screws one at a time (noting where they were) until the sync locks, and you have good patterns. The only thing I dont know is if the 100% on the chroma knob is accurate. I wish I had the manual so I could check that.
John
|
04-23-2006, 08:55 PM
Threaded Mode