![]() |
|
#7
|
|||
|
|||
|
Got it all discharged. It's laying on it's side ontop of my table using blankets and towels to support it upright. Though at the time of writing this i put it back flat down as i accomplished everything i could so far. Cleaned up all the insulation and as much of the filth as i could on the inside. Will continues again once i'm not so lightheaded.
For the moment i took some pictures of all of the capacitors as i could. One of them crumbled immediately unfortunately. I could not figure out the value of it, Here's a bunch of photos with their values based on what i can tell. Self Explanatory ![]() 80 MFD - 250V? 60 MFD - 250v? ![]() MFD v 25 350 10 350 15 450 100 50 ![]() .01 MFD - 600V .01 MFD - 600V ![]() 0.05uf 600v 0.1mfd 1000v ![]() 0.1uf 200v ![]() 5MFD 50V ![]() .05mfd 600v ![]() 0.03uf 600v .1mfd 600v ![]() .1(unsure) 600V ![]() .02 mfd 400 V 0.03uf 600V ![]() ![]() 4,700pf 750v 4,700pf 750v 4,700pf 750v ![]() 10MF 450V 525VSP? 15k 10w Sand Resistor i should probably change. ![]() 3.900pf - 500v
|
|
|