Quote:
Originally Posted by Electronic M
There is no fixed DC polarity to the composite video signal. You either determine polarity based on the injection points DC value with respect to ground. Or you use a non-polarized capacitor for the connection...Which you can make out of 2 polarized lytics of double the desired capacitance connected in anti-series...(Not parallel but rather) Series with one cap reverse polarity from how you'd connect 2 batteries in series.
|
So if I put two 100uf caps negative to negative I would get a 50uf non-polarized cap, right?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Last edited by TinCanAlley; 04-26-2026 at 06:59 PM.
|
04-26-2026, 05:22 PM
Threaded Mode