|
|
|
#7
08-03-2024, 05:38 PM
|
|||
|
|||
|
TV chassis re-cap
I removed each paper/wax cap and started replacing them with film caps.
Again, I heard and read the diagrams online, it seems these yellow film caps are not polarity sensitive? Most of the caps were rated to 400v, the replacement caps I used were around 600-630v. Same uF factory rating with a tolerance +/- 10%  PXL_20240730_204949224 by Thomas Duncan, on Flickr PXL_20240801_010015986 by Thomas Duncan, on Flickr PXL_20240801_010041094 by Thomas Duncan, on Flickr
|
|
|
Threaded Mode