Accidentally hit a choke coil with my soldering iron… how screwed am I?

[Yamamaya42]

Originally Posted by Madeline12

*sigh* Of course, the last capacitor I needed to replace on my first repair I’ve been working so hard on, I accidentally singed one of the coils connected to pin 6 of a 6T8 socket in my Stewart Warner TV. According to the schematics, it’s the choke coil rated at 15 ohms. It looks pretty burned/black sadly… I believe these coils NEED insulation so… I’m curious if rewinding this is even doable knowing how thin the wiring is. Any ideas how to fix this possibly?

Photo of the coil pre-fry and repair below:

look in the SAMS for pos replacements for the coil.
there is often listings under miller / merit / meissner and others on the list.
most of which can still be found on evil-bay for fair prices.
winding your own will be next to impossible w/o the correct rig to do so.

The SAMS should have all the info to find a replacement, including the microhenry rating and resistance and if its wound on a resistor.