|
|
|
|
|
#1
04-26-2024, 12:13 AM
|
||||
|
||||
|
One nice thing about most tripplers sets that have a focus tap is they usually obtained focus via a high resistance divider off the HV output and because of that would self discharge the HV better than shorting does... Still doesn't hurt to double check it's discharged after all the times HV has bit me I can confirm it's not dangerous, but is definitely unpleasant.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 
|
|
#2
04-26-2024, 08:52 AM
|
||||
|
||||
|
Post the OEM tripler part # I will check for subs
Format is 212-###-## Patching old one is not good, only for a test. Check the CRT focus pin for the arc also. Several fixes. Cross that bridge if you come to it. 73 Zeno  LFOD !
|
 |
|
|
Hybrid Mode
