Quote:
Originally Posted by hugocarmo
Hi djski.
Thank You for your answer.
I managed to find the problem.
It was the tape left tape guide, the screw is very loose and it turned with the tape, managed to tune it and fixed it with thread-lock fluid!
It was more simple than I thougt!
Thank You!
|
You have it roughed in. If you are able, to get it set 100%, the RF envelope should be checked using a scope and playing an alignment tape to ensure there is complete interchangability. You might have to further tweek that entrance guide to make the envelope as flat as possible and its amplitude is maxxed out with the tracking control centered. You may find the recordings from your Mits. may not properly play on some other VTR's or vice versa.
11-24-2023, 01:20 PM
Threaded Mode