Crosley 9-413B Horizontal Issue

[Chris K]

Originally Posted by zeno

Hoz freq is off a little. Try the tube 1st no matter what a checker say.
HINT if you adjust coils or caps FLAG the tool with a piece of tape
so you can return to the start. After that look at the caps & test resistors.
When fixed the customer H hold should be apx half range.

BTW this is VERY common after a recap. Set works- recap- H osc off.

73 Zeno
LFOD !

I’ll have to go through the horizontal circuit again and make sure I didn’t make a cap replacement mistake. I’ve been mostly checking and checking resistors. I should make sure I didn’t replace a 0.022 with a 0.0022 etc.