|
Without looking up the model or chassis just looking at the pictures it looks like that is a metal glass CRT. The "bell" or cone part is metal and it is all at High Voltage.
The HV lead is attached to the mounting hardware at the front of the CRT.
I believe that gizmo on the HV cage is a insulated connector. The wire attached to the CRT mounting has a sort of snap like connector that fits into the insulated connector. That is a bit of a reverse of the more common arrangement where the snap is on the wire coming from the HV cage and the connector connects to a small pocket on the side of a glass CRT.
BTW, the CRT mounting hardware has to have a layer of insulation between it and the rest of the TV. It probably is a sheet of plastic that is brittle by now.
|
05-13-2022, 09:36 AM
Threaded Mode