Trying to fix my 19-in Sanyo CRT TV

[zeno]

John
It has most vert sweep. Raster pulses on & off Looks like everything is almost
there. Like a relay chatter or a run voltage off the FBT isnt coming up.
Also has a strange bright blob at bottom center.

73 Zeno

Originally Posted by JohnCT

Are you sure about that model? I recall Sanyos having 5 numbers, not 4.

When you say the tube starts to light, is the raster full? Some Sanyos will back out if there's no vertical deflection. If the raster is only a line or very short vertically, look for a bad vert output IC and associated caps and the B+ (low ohm resistor and rectifier off flyback).

Your video doesn't play.

John