Quote:
Originally Posted by ZenithDude88
OK so what does the DC-DC Converter look like so I can find it in the VCR when I take my unit apart? Also where might I source the IC Protector? And how many capacitors will I need to replace and are they fairly common values?
|
It's a rectangular metal box on the board behind the display. Replace all the electrolytics near it. The IC protector is a common part that should still be available from parts suppliers. It's just a fast acting fuse.
I'm not completely sure if this is what you need, but it looks like it probably is (I don't see the IC protector in there).
http://www.ebay.com/itm/NEW-HITACHI-...-/141802554517
The main problem with these VCRs were the poor quality belts they used. Better rubber doesn't turn to goo like that. I didn't care for the belt driven capstan because it only allowed for 3x visual search speed instead of the normal 7x. This is probably one of the last top loading VCRs made. Most RCA/Hitachi VCRs had been front loading for a few years by the time the L line was made.
06-15-2017, 10:13 AM
Threaded Mode