Atari Lemans Racing

[ieure]

That's a G07-CBO, a very common monitor. Never seen it happen before, myself, but a lot of people will say that if you replace the caps & leave the original flyback in there, the fly will fail soon after.

If the fly went, it probably took the HOT with it. You can get a rebuild kit with everything from https://www.arcadepartsandrepair.com/ or https://iankellogg.com/, both sell good quality parts. You might also want to replace the horizontal width coil, since they're usually very brittle and easy to break when installing the other parts.

That's pretty light burn for a G07, it'll probably look okay if you put a smoked plex in front of it.

Do you have an EPROM programmer? If you can dump a ROM, you can use MAME's romident function to figure out what it is. The MAME romset usually names the files after the ID and position on the board, so you can often figure it out by grepping the source for the text on the sticker over the EPROM window. Lastly, if there are identifying numbers on the boards anywhere, you can Google those and sometimes get a hit.

You should check the sides, looks like someone painted red over most of it, covering up the "LeMans" text.

Here's the manual and schematic: http://arcarc.xmission.com/PDF_Arcad...t_Printing.pdf

Good luck! LeMans is a fun game, classic B&W driver. It's from '76, so no CPU, it's built entirely from discrete logic.