|
|
|
#2
10-07-2016, 09:54 PM
|
||||
|
||||
|
Use a DMM in ohms mode to check continuity.
If it is a field coil type you could tap into a 250-450V radio B+ to power the field (put a 150mA dial lamp in series with it to act as a fuse), and then drive the voice coil with the radio's speaker connections.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 
|
|
|
Threaded Mode