|
|
|
#6
06-03-2016, 07:39 PM
|
|||
|
|||
|
Timmy,
Is your set a Tele-tone Model TV-208 or Model TV-208 TR ? Is the connector between the upper and lower chassis round or rectangular? Does your set use a selenium rectifier connected to pins 8 & 4 of the 25Z6gt? Can you take a picture of the set ? It might be easier to identify then. The Sam's Set 90-11 has a teletone 208 but there is no 6X5, but it does have a ballast called M3 in the parts list. The ballast is not marked in the schematic, only the resistances are shown. If you do have TV-208 could it be some one may have substituted a 6x5 in error for the ballast ? The ballast is located on the sweep chassis between the 25Z6 and 6SL7. Ed 
|
|
|
Threaded Mode