|
|
|
#7
05-09-2016, 10:20 AM
|
||||
|
||||
|
Did you try a flyback tester on the transformer. that DC resistance is an issue for sure.
There is one on a Sencore VA-48 that can pass fail on shorted turns. Multiple turns can short and flutter like that. I observed this on a mid-50s Philco using a similar tube a 6CM6, after I recapped it. I had a junk chassis and the transformer fixed it. You could use several versions (numbers) of this transformer as long as the sets tube is pentode like a 6GK6.
__________________
"When resistors increase in value, they're worthless" -Dave G 
|
|
|
Threaded Mode