Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 04-06-2016, 10:19 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Start by tapping around lightly.
Check the CRT socket for cold joints.
Bright white w/retrace almost always means:
1) loss of 200v supply off flyback
2) bad drive from luma causing the 3 outputs to go very low.
3) too much G-2
4) on SOME sets H-K short on CRT ! Instead of going the color
of the shorted gun it will go white !
Keep in mind low cathode gives brite pix & hi gives black.

Second thing is the tuner PKG. Some used one big tuner others
used used two PKG's plugged together. Where wire bundles
come in or plug in resolder were they come in. Caused all kinds
of intermittents but probably NOT yours.

OH yah, how about some nudies of the chassis ?

73 Zeno
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:33 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.