![]() |
|
#2
|
||||
|
||||
|
Sony AKB circuits will mute the pix if a bad CRT but
I will assume yours is OK. Usually the pix blinks when cold & does it less with warm up. It is also sensitive to the G-2 setting so turn it up a tad & see what happens. Basicly if any gun cant draw enuf current the jungle IC shuts off all Y & C. During blanking each gun is fired & current measured. You can usually see three color lines at the top if you shrink the vert a little. The CRT should have about 125V on the cathodes with normal pix & 200V no pix ( zero beam ), G-2 abt 500V any pix. Dont remember what the G-1 did in these. 73 Zeno
|
|
|