Quote:
Originally Posted by fixmeplease
I'm glad to hear it is a somewhat decent quality. The 20W tests at 330 and is supposed to be 36 ohms. this wont matter? Yes, it has a 200 and a 250uf electro's. They'll be one of the first things replaced. I think they will both be replaced with 220's unless thats a problem.
Can the chassis safely be started without the CRT, speaker, etc not hooked up? Too test voltages. The less times I have to pull it apart the safer the crt neck will be.
Thank you for the reply.
|
That resistance can't be that high! The tubes wouldn't light up. You can run the set without the CRT, but the yoke has to be connected. 220's are probably enough capacitance.
12-05-2015, 12:39 PM
Threaded Mode