an evening with RCA - service seminar booklet - Videokarma.org TV - Video

old_tv_nut · #1 03-28-2015, 08:49 PM

"an evening with RCA", service seminar booklet from February 1966 -

60 pages, 20 MB pdf file:

http://www.bretl.com/tvarticles/docu...ithRCA0266.pdf

DavGoodlin · #2 03-28-2015, 10:02 PM

Thanks for the treat. It confirms the best way to do PC board work is to stay on the top if you can

N2IXK · #3 03-29-2015, 10:08 AM

Clipping out the old part and soldering the replacement to the stubs on the top side of the board was standard procedure if you were fixing the set in the customer's home. Saved the time and effort of pulling the chassis to get at the bottom of the board.

I wouldn't recommend it for restoration work on vintage sets, though. Would really look terrible to see every cap and off-spec resistor in a set replaced in that manner...

wa2ise · #4 03-29-2015, 03:56 PM

Quote:

Originally Posted by N2IXK

Clipping out the old part and soldering the replacement to the stubs on the top side of the board was standard procedure if you were fixing the set in the customer's home.
.

I did that with this chassis

saved a fair amount of agony, and the less than pretty stubs are hidden from normal view anyway...

Marco-nix · #5 03-30-2015, 07:12 AM

Thanks for the treat Old Tv Nut.

Raddion · #6 04-01-2015, 06:07 AM

This is simply awesome. Thank you!!!