Resistor or jumper at hv rectifer socket: Zenith 25mc30 - Videokarma.org TV - Video

		Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television
Resistor or jumper at hv rectifer socket: Zenith 25mc30

Notices

Time to get this site upgraded, so we are passing the hat around. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html


	We appreciate your help in keeping this site going.

Thread Tools

Display Modes

#11

02-17-2015, 07:27 PM

Zenith6S321 Zenith6S321 is offline

VideoKarma Member

Join Date: Aug 2010

Location: Charleston, West Virginia

Posts: 303

The 25MC30 schematic shows the 1.5K resistor connects to pin 1 and 9 of the 3AT2. The 3AT2 PDF shows that pin 4 is a no connect. So pin 4 could be used as a tie point for connecting the other end of the resistor to the anode lead. The schematic does not show this, so I'm guessing.

Dave

3AT2 PDF:
http://frank.pocnet.net/sheets/049/3/3AT2.pdf

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -5. The time now is 03:51 AM.