Quote:
Originally Posted by Username1
...
I'm wondering about the blue dipping on both ends at the edge of the screen.....
Could the zip tie around the convergence magnet assembly be changing it's
orientation from a perfect perpendicular to cause the dipping....?
.
|
The three coils on the convergence board are blue line adjustments. One of them (I forget which one) is for the horiz blue line.
A word of caution: one of those , if you back the slug out too far, will roast one of the pots. So go easy.
02-14-2015, 09:30 PM
Threaded Mode