![]() |
|
#15
|
||||
|
||||
|
Quote:
With changes of scene it will "breathe" in & out. Very common on tube sets but very rare on solid states. BLEEDING or FLAMING is a streak to the right of a bright scene. Can be one color or any color or white. Almost always weak CRT. Turning up brightness & contrast make it much worse. BTW since you have a "knob job" tuner forget the cable switch. There are 12 presets for VHF fine tuning, one for each channel. It is a screw so you can turn it quite a few times. Most the time you can go to the next channel, ch5 can go to ch4 or ch6. Proper way to FT is turn off any AFT & auto color switches, fine tune for best pix then put the AFT on. 73 Zeno
|
| Audiokarma |
|
|