Predicta Princess spare chassis

[bonanzaman]

Good job, Dave....I had kind of the same idea as you on making the wires pluggable, but went a little further:
The ones without the connectors are for that hard to get to 4 section C2 cap. I realized that I probably should have taken the shrink-wrap all the way down to the bottom of the connector, but they seem to hold really well. I did all 30 some odd wires....really did not take that long, and I can R&R the board in about a minute and a half. I like the idea of being able to completely free up the board for 360 deg access for re-capping and any other work that needs doing. I'm going to rebuild the K5 network, as it is showing signs of rupturing, leave the others for now, and re-installing the board for a power-up test...we'll see if I got all the numbers right!