Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #20  
Old 03-16-2014, 01:53 PM
Don Lindsly Don Lindsly is offline
Ex-Philco
 
Join Date: Jul 2005
Location: Colorado
Posts: 450
Few Philco TVs had chassis-mounted CRTs for good reason. There was far less factory and service breakage and lighter to handle. The 1956 TV 440/444 had chassis mounted CRTs and were a nuisance to handle. After that, only portables came that way.

Most shops had test set ups so firing up a chassis in the shop was no problem and took up much less room.

Yes, a bad video detector can cause a raster with no sound, no picture. A simple ohm meter check will confirm a suspect.

Don
Reply With Quote
Audiokarma
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:14 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.