What to do on used sets?

[zeno]

Originally Posted by Retro in RI

Ok, one tag is faded and says "for all correspondence must include chassis number........" (too faded to read)

The other tag, which overlaps the first, simply gives the serial number, which is 5429025.

I was disappointed to not see the other tag you mentioned.

Al

Best find out what you have.
Look on top right side of chassis the hoz output transistor is there.
Just below the heat sink see if there is a large cap there with
4 wires. If its orange you are OK. If its white you MUST change it
before running it. If it opens the HV will go up to 40KV ++
& do a lot of damage including the CRT sometimes.

If not there its an early run. It will have IIRC 5 separate caps
marked 22-5001. One behind heat sink, 1 or 2 on flyback & the
rest on the bottom on the chassis. Again orange is good & white needs
replacing off ALL but its not as critical.

73 Zeno