Scored A 1953 PHILCO

[damen]

I got this for $50 on craigslist and I have ordered all the caps to restore it. The 21ep4 non aluminized Crt was original and weak. Emissions came up to 70% after a long worm up but takes about 7 or 8 min. each time I let it cool down. I was lucky to pick up a couple of old sets a Zenith and a Hoffman with beat up cabinets and the Zenith had a Sylvania replacement Aluminized 21ep4a that was good I will post more Pics. when it is done

[47'Plymouth]

I have a factory service manual....can send you a copy!

[stromberg6]

EXACTLY what I have been wanting for many years!! All the best with your great find. Had a 1951 17 incher with full doors, and wired remote control, but it was thrown out without my knowledge.
Does yours have the power transformer, or the seleniums?
Kevin

[damen]

Originally Posted by stromberg6

EXACTLY what I have been wanting for many years!! All the best with your great find. Had a 1951 17 incher with full doors, and wired remote control, but it was thrown out without my knowledge.
Does yours have the power transformer, or the seleniums?
Kevin

Sorry to here that was thrown out that sounds like a neat set. Hopefully one will come your way soon. Mine has the selenium's.

[Eric H]

I have the exact same set but in Maple and no UHF tuner, also the knobs are different, and so's the grille cloth, but other than that it's exactly the same.

http://www.vintagetvsets.com/philcof.htm

[Einar72]

Are you scrapping the Zenith?

[bandersen]

Originally Posted by Eric H

I have the exact same set but in Maple and no UHF tuner, also the knobs are different, and so's the grille cloth, but other than that it's exactly the same.

http://www.vintagetvsets.com/philcof.htm

I have a NOS Philco UHF upgrade kit that I think would work in your set.

[damen]

Originally Posted by Einar72

Are you scrapping the Zenith?

Yea the sets were stored in a very old leaky garage, the guy had a tarp over the roof to help keep the water out and the sets were in very poor condition and covered with mold. I gave the cabinets away on Craigslist cause I had no where to put them.

[dieseljeep]

Originally Posted by Eric H

I have the exact same set but in Maple and no UHF tuner, also the knobs are different, and so's the grille cloth, but other than that it's exactly the same.

http://www.vintagetvsets.com/philcof.htm

Reminds me of Cheech and Chong: "It's the same, only different".

[cwmoser]

A picture of 1953 Philco Televisions is what got me interested in this hobby.
I saw this picture and immediately started looking for one to learn how to restore. Check out the picture of two NOS 1953 Philco TVs - love to have one.

I've picked up 6 other antique TVs but still have not found that 1953 Philco that
got me to move from antique radios to televisions:-)

I think you have a great restoration project.

Carl

[compucat]

Originally Posted by cwmoser

A picture of 1953 Philco Televisions is what got me interested in this hobby.
I saw this picture and immediately started looking for one to learn how to restore. Check out the picture of two NOS 1953 Philco TVs - love to have one.

I've picked up 6 other antique TVs but still have not found that 1953 Philco that
got me to move from antique radios to televisions:-)

I think you have a great restoration project.

Carl

I love that style of set. It looks like a 17" screen. I know many people including collectors are not too excited about the typical 1950s console but I really like the style of them, even the plain ones. Many of them seem to have good build quality also. I would love to have had one of those NOS Philcos.

[Dan Starnes]

Nice set!!

[jr_tech]

Please pardon the crummy picture, but here is one of my '53 17" Philcos, which, I believe has the "dealer add" UHF tuner. Perhaps this is similar to the one Bandersen has?

jr

[Eric H]

Originally Posted by bandersen

I have a NOS Philco UHF upgrade kit that I think would work in your set.

Thanks Bob but I like the look of brass cover they put over the hole for the UHF tuner, UHF is useless now anyway.

"High Fidelity" "Golden Grid"


Here's an old video of my 53 Philco working, the video is lousy but that "High Fidelity" sound comes through pretty well.
Not sure what tube these use for Audio Output or if it's Push-pull?

[Reece]

Love the video, and, I remember those Live Better Electrically ads!