Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-09-2012, 02:58 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
I've obtained many usable caps from scrapping out old tube VGA monitors. Also resistors and some coils. Ask any ham radio operator about the concept of the "junk box"
__________________
Reply With Quote
  #2  
Old 12-09-2012, 04:33 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
always test before putting in new caps, I have had a few new yellow axial lead caps (think they were all .1 IIRC) that were badly shorted.

I like to use the modern dipped nichicons if I have to buy new, and then I get them generally in the 1-2kv which will cover pretty much any need. the higher rated voltage caps are generally larger than say a typical 630v, but that just makes them closer to the orig size.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:12 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.