|
|
|
#19
06-03-2012, 09:01 AM
|
||||
|
||||
|
Like Inx64 and Yamahafreak said,assorted soft bristle paintbrushes,a good cleaner(i use 50/50 ammonia/water solution in a spray bottle.)Rags,paper towels,vacuum cleaner(forgot about the old leaf blower trick
 )I usually go a step further and take the chassis out for more thorough inspection(bad solder joints,lead cutting etc.)By the way, how are your soldering skills?That CRT pcb is gonna need some work and probably the main pcb as well(bad solder joints)....
__________________
"IPC 610 Class E & J STD-001 Certified" 
|
|
|
Threaded Mode