Do I see 8N124.. ? that would probably be the chassis number.
Check the two rect to see if their shorted, then check all the ebc on all the sockets to see if there is an shorts, OR remove the transistors and check them above. The main rectifiers are the ones studded into the chassis with the blue wires. I also think i see a small one. You may need to unbolt the stud and lift the rectifier out of the chassis. I bet that chassis is positive, thats why all the caps are isolated.
Looks like one of the driver transformers has been replaced and in that case it was most likely smoked if a driver shorted in the paste.