Zenith Console combo

[DaveWM]

progress, working on HV regulation with help from CTC17 (dan).

seems I can dial in the HOT current and HV with different HOT
s but the regualation is just not happening. will be checking the reg tube voltages tomorrow. the Plan is to replace the focus resistor (at the edge of adjustment now) and hope that effects how the regulator is working.

I had noticed the color was a bit weak, found a chroma amp screen grid resistor that had driffted up about 400% so that will get replace as well. while I have it out I will check the disk decoupler cap, just in case it was leaking, thereby stressing out the screen resistor. its just a little 82k 1/4 watt.