|
|
|
#2
02-04-2009, 08:02 AM
|
||||
|
||||
|
First vacuum out as much as you can, especially from the motor. You might have to rig a small end hose to go on your vacuum cleaner hose to get into the tight spots. Then take it outside and blow it out with a can of computer keyboard cleaning "air." Then go to auto parts store and buy CRC Electronics Cleaner, NOT brake cleaner. Used on auto electronics and connectors so shouldn't hurt your machine. Take it outside and set it on a board over the garbage can and give it a bath.
Reece
__________________
Reece Perfection is hard to reach with a screwdriver. 
|
|
|
Threaded Mode